LogoLogo
Gen 3.0
Gen 3.0
  • Introduction
  • Kayak
    • Getting Started
      • Assemble your power meter
      • Charge your power meter
      • Configure your power meter settings
        • Blade tip to hand distances
        • Blade tip to blade tip distance
        • Blade twist
        • Blade type attached to shaft
        • Left blade tip to LED distance
    • Calibration
      • Zero Offset
        • Zero Offset calibration
      • Scale Factor
        • N channel Scale Factor calibration
        • O channel Scale Factor calibration
    • Advanced
      • Deep sleep
      • Adjust your clamp
      • Remove and attach your sleeve
  • Canoe/sup/dragon boat
    • Getting Started
      • Assemble
      • Charge
      • Configure
    • Calibration
      • Zero Offset
        • Perform a ZO calibration
      • Scale Factor
        • A channel Scale Factor calibration
    • Advanced
      • Deep sleep
      • Adjust your clamp
      • Remove and attach your sleeve
  • General
    • Web Bluetooth App
      • How to place the power meter in deep sleep
    • Updating Firmware
      • How to update the power meter firmware using the Web Browser
      • How to update the power meter firmware using nRF Connect
    • Real-time Data
      • How to pair a Garmin Forerunner 910XT with a power meter
      • How to pair a Garmin Edge 1030 with a power meter
    • High Speed Data
      • How to start/stop recording High Speed Data
      • How to download High Speed Data (ANT)
      • How to download High Speed Data (Automatic Script)
      • How to view High Speed Data
      • How to change the High Speed Data settings
    • Shaft Information
    • Model Descriptions
      • Power Meter
      • Power Meter w/ High Speed Data
    • Firmware Changelog
    • Manufacturer's Warranty
Powered by GitBook
On this page
  • Step 1. Insert a USB ANT stick into a USB port on a Windows PC/tablet
  • Step 2. Open the 'ANT-FS PC Host' application
  • Step 2. Click 'Open'
  • Step 3. Click 'Options' (Optional)
  • Step 4. Set the 'Device ID' to the serial number of the power meter (Optional)
  • Step 5. Click 'Search'
  • Step 6. Click 'Pass Thru'
  • Step 7. Click 'Directory'
  • Step 8. Browse to the location where you wish to download the file and enter a file name
  • Step 9. Select the file you wish to download from the Directory at the bottom of the window
  • Step 10. Click 'Download'
  1. General
  2. High Speed Data

How to download High Speed Data (ANT)

PreviousHow to start/stop recording High Speed DataNextHow to download High Speed Data (Automatic Script)

Last updated 3 years ago

If you are having trouble downloading files (e.g. downloads seem to stop before being finished), it is most likely due to interference from a nearby WiFi router. Consider disconnecting power to the WiFi router or moving the USB ANT stick far away from the source of interference.

If you don't have ANT-FS PC Tools installed on your computer you will need to download it from here: .

You will need to create an account and sign in to in order to download the software. Please use an alternative browser if Chrome produces an error.

Step 1. Insert a USB ANT stick into a USB port on a Windows PC/tablet

Step 2. Open the 'ANT-FS PC Host' application

Step 2. Click 'Open'

Step 3. Click 'Options' (Optional)

Once you've set the options once you shouldn't need to perform this step again as the application will store and automatically load these options next time you launch the software.

Step 4. Set the 'Device ID' to the serial number of the power meter (Optional)

A wildcard search will be performed if the Device ID is set to '0'.

Step 5. Click 'Search'

Step 6. Click 'Pass Thru'

Step 7. Click 'Directory'

Step 8. Browse to the location where you wish to download the file and enter a file name

Step 9. Select the file you wish to download from the Directory at the bottom of the window

Step 10. Click 'Download'

https://www.thisisant.com/resources/ant-fs-pc-tools
thisisant.com
USB ANT Stick™