LogoLogo
Gen 3.0
Gen 3.0
  • Introduction
  • Kayak
    • Getting Started
      • Assemble your power meter
      • Charge your power meter
      • Configure your power meter settings
        • Blade tip to hand distances
        • Blade tip to blade tip distance
        • Blade twist
        • Blade type attached to shaft
        • Left blade tip to LED distance
    • Calibration
      • Zero Offset
        • Zero Offset calibration
      • Scale Factor
        • N channel Scale Factor calibration
        • O channel Scale Factor calibration
    • Advanced
      • Deep sleep
      • Adjust your clamp
      • Remove and attach your sleeve
  • Canoe/sup/dragon boat
    • Getting Started
      • Assemble
      • Charge
      • Configure
    • Calibration
      • Zero Offset
        • Perform a ZO calibration
      • Scale Factor
        • A channel Scale Factor calibration
    • Advanced
      • Deep sleep
      • Adjust your clamp
      • Remove and attach your sleeve
  • General
    • Web Bluetooth App
      • How to place the power meter in deep sleep
    • Updating Firmware
      • How to update the power meter firmware using the Web Browser
      • How to update the power meter firmware using nRF Connect
    • Real-time Data
      • How to pair a Garmin Forerunner 910XT with a power meter
      • How to pair a Garmin Edge 1030 with a power meter
    • High Speed Data
      • How to start/stop recording High Speed Data
      • How to download High Speed Data (ANT)
      • How to download High Speed Data (Automatic Script)
      • How to view High Speed Data
      • How to change the High Speed Data settings
    • Shaft Information
    • Model Descriptions
      • Power Meter
      • Power Meter w/ High Speed Data
    • Firmware Changelog
    • Manufacturer's Warranty
Powered by GitBook
On this page
  • Power Meter w/ High Speed Data (USD$1999)
  • High Speed Data (100Hz) Metrics for Power Meter w/ High Speed Data
  1. General
  2. Model Descriptions

Power Meter w/ High Speed Data

PreviousPower MeterNextFirmware Changelog

Last updated 2 years ago

Power Meter w/ High Speed Data (USD$1999)

  • BLE/ANT+ real-time (per-stroke) metrics for display/collection on BLE/ANT+ head-units

    • Average Stroke Power, Strokes Per Minute and Average Stroke Power Balance available on all compatible devices e.g. Garmin, Polar and Suunto

  • On-board memory to record a minimum of 4 hours of High Speed Data (nominally 100Hz with up to 200Hz proposed) in .fit file format

  • High Speed Data from the left and the right shafts are automatically synchronized, combined into a single .fit file and recorded in a single location (the right shaft) for ease of download.

  • Wireless downloading of High Speed Data over ANT (download over BLE proposed)

  • High-accuracy clock enables time-synchronization of High Speed Data with other data sources such as High Speed Data from additional power meters (e.g. K2 or K4) or video, boat acceleration, GPS boat speed etc.

  • UTC time-synchronization requires a GPS sync box (sold separately) and the syncing process occurs automatically over-the-air (i.e. no cables).

High Speed Data (100Hz) Metrics for Power Meter w/ High Speed Data

  • Top Hand Force

  • Bottom Hand Force

  • Top Hand Power

  • Bottom Hand Power

High Speed Data example showing average power and top and bottom hand forces