LogoLogo
Gen 3.0
Gen 3.0Gen 2.1Gen 3.1 & 3.2
Gen 3.0
Gen 3.0Gen 2.1Gen 3.1 & 3.2
  • Introduction
  • Kayak
    • Getting Started
      • Assemble your power meter
      • Charge your power meter
      • Configure your power meter settings
        • Blade tip to hand distances
        • Blade tip to blade tip distance
        • Blade twist
        • Blade type attached to shaft
        • Left blade tip to LED distance
    • Calibration
      • Zero Offset
        • Zero Offset calibration
      • Scale Factor
        • N channel Scale Factor calibration
        • O channel Scale Factor calibration
    • Advanced
      • Deep sleep
      • Adjust your clamp
      • Remove and attach your sleeve
  • Canoe/sup/dragon boat
    • Getting Started
      • Assemble
      • Charge
      • Configure
    • Calibration
      • Zero Offset
        • Perform a ZO calibration
      • Scale Factor
        • A channel Scale Factor calibration
    • Advanced
      • Deep sleep
      • Adjust your clamp
      • Remove and attach your sleeve
  • General
    • Web Bluetooth App
      • How to place the power meter in deep sleep
    • Updating Firmware
      • How to update the power meter firmware using the Web Browser
      • How to update the power meter firmware using nRF Connect
    • Real-time Data
      • How to pair a Garmin Forerunner 910XT with a power meter
      • How to pair a Garmin Edge 1030 with a power meter
    • High Speed Data
      • How to start/stop recording High Speed Data
      • How to download High Speed Data (ANT)
      • How to download High Speed Data (Automatic Script)
      • How to view High Speed Data
      • How to change the High Speed Data settings
    • Shaft Information
    • Model Descriptions
      • Power Meter
      • Power Meter w/ High Speed Data
    • Firmware Changelog
    • Manufacturer's Warranty
Powered by GitBook
On this page
  • Step 1. Attach the end of the measuring tape to the left blade tip
  • Step 2. Measure the distance from the left blade tip to the right blade tip
  • Step 3. Enter the distance into the 'Blade tip to blade tip distance' setting
  1. Kayak
  2. Getting Started
  3. Configure your power meter settings

Blade tip to blade tip distance

The distance between blade tip to blade tip.

PreviousBlade tip to hand distancesNextBlade twist

Last updated 3 years ago

Step 1. Attach the end of the measuring tape to the left blade tip

Step 2. Measure the distance from the left blade tip to the right blade tip

Step 3. Enter the distance into the 'Blade tip to blade tip distance' setting

example: Blade tip to blade tip 2180mm