> For the complete documentation index, see [llms.txt](https://support.onegiantleap.co.nz/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://support.onegiantleap.co.nz/general/clamp.md).

# Clamp Adjustment

You can increase or decrease the clamp tightness by adjusting the screws on the clamp mechanism:

## Step 1. Tighten or loosen the clamp screw

*  Use a Phillips-head screwdriver. Clockwise will tighten the clamp, counterclockwise will loosen the clamp. If it requires more than a gentle force to lock the clamp with the left shaft in, it is probably too tight and should be loosened.

![](/files/-M0kfE-xWxXfuD6yAQk-)