LogoLogo
Gen 3.1 & 3.2
Gen 3.1 & 3.2
  • Introduction
  • Kayak
    • Assemble your power meter
    • Configure your power meter
      • Blade tip to hand distances
      • Blade tip to blade tip distance
      • Blade twist
      • Blade type attached to shaft
      • Left blade tip to LED distance
  • Canoe/Dragon Boat/SUP
    • Assemble your power meter (Gen 3.1)
    • Assemble your power meter (Gen 3.2)
    • Configure your power meter
      • Blade tip to hand distances
      • Blade type attached to shaft
      • Blade tip to LED distance
      • Shaft to handle offset distance
  • General
    • Battery Charging
    • Clamp Adjustment
    • Web Bluetooth App
    • Zero Offset Calibration
      • How to perform a Zero Offset calibration
    • Scale Factor Calibration
      • N channel Scale Factor calibration
      • O channel Scale Factor calibration
    • Updating Firmware
      • How to update the power meter firmware using the Web Browser
      • Latest firmware version
    • Real-time Data
      • How to pair with your device
    • High Speed Data
      • How to start/stop recording High Speed Data
      • How to download High Speed Data (ANT)
      • How to download High Speed Data (Automatic Script) - Experimental
      • How to view High Speed Data
    • Deep Sleep
    • GPS Sync Box
    • Metrics
      • Power
      • Force
    • Upgrade Description
    • Manufacturer's Warranty
    • Troubleshooting
      • High Speed Data Recording Fault
    • Shaft & Blade Sizing
    • Connections using hot melt glue
  • Training Guide
    • Functional Threshold Power
    • Power Zones
    • Fitness Tracking
    • Optimum Cadence
    • Technique Efficiency
    • Training to improve 30 second or 1 minute Power
    • Training to improve 4 minute Power
    • Training to improve Functional Threshold Power
    • Training to improve Endurance
Powered by GitBook
On this page
  • What is High Speed Data?
  • What format is High Speed Data stored in?
  1. General

High Speed Data

What is High Speed Data?

High Speed Data is the recording of pushing hand force (N), pulling hand force (N) and power (W) at 100 or more times a second (a sample every 10 milliseconds or less).

What format is High Speed Data stored in?

The High Speed Data is stored as a .fit file.

PreviousHow to pair with your deviceNextHow to start/stop recording High Speed Data

Last updated 2 years ago