LogoLogo
Gen 3.1 & 3.2
Gen 3.1 & 3.2
  • Introduction
  • Kayak
    • Assemble your power meter
    • Configure your power meter
      • Blade tip to hand distances
      • Blade tip to blade tip distance
      • Blade twist
      • Blade type attached to shaft
      • Left blade tip to LED distance
  • Canoe/Dragon Boat/SUP
    • Assemble your power meter (Gen 3.1)
    • Assemble your power meter (Gen 3.2)
    • Configure your power meter
      • Blade tip to hand distances
      • Blade type attached to shaft
      • Blade tip to LED distance
      • Shaft to handle offset distance
  • General
    • Battery Charging
    • Clamp Adjustment
    • Web Bluetooth App
    • Zero Offset Calibration
      • How to perform a Zero Offset calibration
    • Scale Factor Calibration
      • N channel Scale Factor calibration
      • O channel Scale Factor calibration
    • Updating Firmware
      • How to update the power meter firmware using the Web Browser
      • Latest firmware version
    • Real-time Data
      • How to pair with your device
    • High Speed Data
      • How to start/stop recording High Speed Data
      • How to download High Speed Data (ANT)
      • How to download High Speed Data (Automatic Script) - Experimental
      • How to view High Speed Data
    • Deep Sleep
    • GPS Sync Box
    • Metrics
      • Power
      • Force
    • Upgrade Description
    • Manufacturer's Warranty
    • Troubleshooting
      • High Speed Data Recording Fault
    • Shaft & Blade Sizing
    • Connections using hot melt glue
  • Training Guide
    • Functional Threshold Power
    • Power Zones
    • Fitness Tracking
    • Optimum Cadence
    • Technique Efficiency
    • Training to improve 30 second or 1 minute Power
    • Training to improve 4 minute Power
    • Training to improve Functional Threshold Power
    • Training to improve Endurance
Powered by GitBook
On this page
  1. General
  2. Updating Firmware

Latest firmware version

PreviousHow to update the power meter firmware using the Web BrowserNextReal-time Data

Last updated 2 months ago

Below is a link to download the latest version of firmware for Gen 3.1 and 3.2 Power Meters (v1.4.0):

149KB
application_v1_4_0.zip
archive