LogoLogo
Gen 3.1 & 3.2
Gen 3.1 & 3.2
  • Introduction
  • Kayak
    • Assemble your power meter
    • Configure your power meter
      • Blade tip to hand distances
      • Blade tip to blade tip distance
      • Blade twist
      • Blade type attached to shaft
      • Left blade tip to LED distance
  • Canoe/Dragon Boat/SUP
    • Assemble your power meter (Gen 3.1)
    • Assemble your power meter (Gen 3.2)
    • Configure your power meter
      • Blade tip to hand distances
      • Blade type attached to shaft
      • Blade tip to LED distance
      • Shaft to handle offset distance
  • General
    • Battery Charging
    • Clamp Adjustment
    • Web Bluetooth App
    • Zero Offset Calibration
      • How to perform a Zero Offset calibration
    • Scale Factor Calibration
      • N channel Scale Factor calibration
      • O channel Scale Factor calibration
    • Updating Firmware
      • How to update the power meter firmware using the Web Browser
      • Latest firmware version
    • Real-time Data
      • How to pair with your device
    • High Speed Data
      • How to start/stop recording High Speed Data
      • How to download High Speed Data (ANT)
      • How to download High Speed Data (Automatic Script) - Experimental
      • How to view High Speed Data
    • Deep Sleep
    • GPS Sync Box
    • Metrics
      • Power
      • Force
    • Upgrade Description
    • Manufacturer's Warranty
    • Troubleshooting
      • High Speed Data Recording Fault
    • Shaft & Blade Sizing
    • Connections using hot melt glue
  • Training Guide
    • Functional Threshold Power
    • Power Zones
    • Fitness Tracking
    • Optimum Cadence
    • Technique Efficiency
    • Training to improve 30 second or 1 minute Power
    • Training to improve 4 minute Power
    • Training to improve Functional Threshold Power
    • Training to improve Endurance
Powered by GitBook
On this page
  • Step 1. Determine the 'blade twist hand'
  • Step 2. Determine the 'blade twist angle'
  • Step 3. Set the 'Blade twist hand' and 'Blade twist angle' settings
  1. Kayak
  2. Configure your power meter

Blade twist

The hand which grips and twists the shaft/blade and the blade twist angle

PreviousBlade tip to blade tip distanceNextBlade type attached to shaft

Last updated 1 year ago

Step 1. Determine the 'blade twist hand'

  • If you grip and twist the blade in your right hand (it rotates/slips in your left hand) then set blade offset twist hand to Right Hand Twist.

  • If you grip and twist the blade in your left hand (it rotates/slips in your right hand) then set blade offset twist hand to Left Hand Twist.

Step 2. Determine the 'blade twist angle'

Step 3. Set the 'Blade twist hand' and 'Blade twist angle' settings

Shaft set to 60 degrees Right Hand Twist