# Support ## Gen 3.0 - [Introduction](https://support.onegiantleap.co.nz/3.0/master.md) - [Getting Started](https://support.onegiantleap.co.nz/3.0/kayak/getting-started.md) - [Assemble your power meter](https://support.onegiantleap.co.nz/3.0/kayak/getting-started/how-to-assemble-a-kayak-power-meter.md) - [Charge your power meter](https://support.onegiantleap.co.nz/3.0/kayak/getting-started/how-to-charge-the-kayak-power-meter-batteries.md) - [Configure your power meter settings](https://support.onegiantleap.co.nz/3.0/kayak/getting-started/how-to-set-the-kayak-power-meter-settings.md) - [Blade tip to hand distances](https://support.onegiantleap.co.nz/3.0/kayak/getting-started/how-to-set-the-kayak-power-meter-settings/blade-tip-to-hand-distance.md): The distance from the left blade tip to the left hand and the distance from the right blade tip to the right hand. - [Blade tip to blade tip distance](https://support.onegiantleap.co.nz/3.0/kayak/getting-started/how-to-set-the-kayak-power-meter-settings/blade-tip-to-blade-tip-distance.md): The distance between blade tip to blade tip. - [Blade twist](https://support.onegiantleap.co.nz/3.0/kayak/getting-started/how-to-set-the-kayak-power-meter-settings/blade-twist.md): The hand which grips and twists the shaft/blade and the blade twist angle. - [Blade type attached to shaft](https://support.onegiantleap.co.nz/3.0/kayak/getting-started/how-to-set-the-kayak-power-meter-settings/blade-type-attached-to-shaft.md): The make and model of the blades you have attached to the shaft e.g. Jantex Beta Large. - [Left blade tip to LED distance](https://support.onegiantleap.co.nz/3.0/kayak/getting-started/how-to-set-the-kayak-power-meter-settings/blade-tip-to-datum-distances.md): The distance from the left blade tip to the left datum and the distance from the right blade tip to the right datum. - [Calibration](https://support.onegiantleap.co.nz/3.0/kayak/calibration.md) - [Zero Offset](https://support.onegiantleap.co.nz/3.0/kayak/calibration/zero-offset.md) - [Zero Offset calibration](https://support.onegiantleap.co.nz/3.0/kayak/calibration/zero-offset/how-to-perform-a-zero-offset-calibration.md) - [Scale Factor](https://support.onegiantleap.co.nz/3.0/kayak/calibration/scale-factor.md) - [N channel Scale Factor calibration](https://support.onegiantleap.co.nz/3.0/kayak/calibration/scale-factor/how-to-perform-a-scale-factor-calibration.md) - [O channel Scale Factor calibration](https://support.onegiantleap.co.nz/3.0/kayak/calibration/scale-factor/b-channel-scale-factor-calibration.md) - [Advanced](https://support.onegiantleap.co.nz/3.0/kayak/advanced.md) - [Deep sleep](https://support.onegiantleap.co.nz/3.0/kayak/advanced/deep-sleep.md) - [Adjust your clamp](https://support.onegiantleap.co.nz/3.0/kayak/advanced/how-to-adjust-a-kayak-power-meter-clamp.md) - [Remove and attach your sleeve](https://support.onegiantleap.co.nz/3.0/kayak/advanced/how-to-remove-and-install-the-clamp-sleeve.md) - [Getting Started](https://support.onegiantleap.co.nz/3.0/dragon-boat/getting-started.md): Let's get that power meter sussed! - [Assemble](https://support.onegiantleap.co.nz/3.0/dragon-boat/getting-started/assemble.md): Putting it all together - [Charge](https://support.onegiantleap.co.nz/3.0/dragon-boat/getting-started/charge.md): Power up - [Configure](https://support.onegiantleap.co.nz/3.0/dragon-boat/getting-started/configure.md): Configure your power meter settings - [Calibration](https://support.onegiantleap.co.nz/3.0/dragon-boat/calibration.md) - [Zero Offset](https://support.onegiantleap.co.nz/3.0/dragon-boat/calibration/zero-offset.md) - [Perform a ZO calibration](https://support.onegiantleap.co.nz/3.0/dragon-boat/calibration/zero-offset/perform-a-zo-calibration.md) - [Scale Factor](https://support.onegiantleap.co.nz/3.0/dragon-boat/calibration/scale-factor.md) - [A channel Scale Factor calibration](https://support.onegiantleap.co.nz/3.0/dragon-boat/calibration/scale-factor/a-channel-scale-factor-calibration.md) - [Advanced](https://support.onegiantleap.co.nz/3.0/dragon-boat/advanced.md) - [Deep sleep](https://support.onegiantleap.co.nz/3.0/dragon-boat/advanced/sleep.md): Let your meter get some rest before your next go - [Adjust your clamp](https://support.onegiantleap.co.nz/3.0/dragon-boat/advanced/adjust-your-clamp.md) - [Remove and attach your sleeve](https://support.onegiantleap.co.nz/3.0/dragon-boat/advanced/remove-and-attach-your-sleeve.md) - [Web Bluetooth App](https://support.onegiantleap.co.nz/3.0/general/web-bluetooth-app.md) - [How to place the power meter in deep sleep](https://support.onegiantleap.co.nz/3.0/general/web-bluetooth-app/how-to-place-the-power-meter-in-deep-sleep.md) - [Updating Firmware](https://support.onegiantleap.co.nz/3.0/general/updating-firmware.md) - [How to update the power meter firmware using the Web Browser](https://support.onegiantleap.co.nz/3.0/general/updating-firmware/how-to-update-the-power-meter-firmware-using-the-web-browser.md) - [How to update the power meter firmware using nRF Connect](https://support.onegiantleap.co.nz/3.0/general/updating-firmware/how-to-update-the-power-meter-firmware-using-nrf-connect.md) - [Real-time Data](https://support.onegiantleap.co.nz/3.0/general/real-time-data.md) - [How to pair a Garmin Forerunner 910XT with a power meter](https://support.onegiantleap.co.nz/3.0/general/real-time-data/how-to-pair-a-garmin-forerunner-910xt-with-a-power-meter.md) - [How to pair a Garmin Edge 1030 with a power meter](https://support.onegiantleap.co.nz/3.0/general/real-time-data/how-to-pair-a-garmin-edge-1030-with-a-power-meter.md) - [High Speed Data](https://support.onegiantleap.co.nz/3.0/general/high-speed-data.md) - [How to start/stop recording High Speed Data](https://support.onegiantleap.co.nz/3.0/general/high-speed-data/how-to-start-stop-recording-high-speed-data.md) - [How to download High Speed Data (ANT)](https://support.onegiantleap.co.nz/3.0/general/high-speed-data/how-to-download-high-speed-data.md) - [How to download High Speed Data (Automatic Script)](https://support.onegiantleap.co.nz/3.0/general/high-speed-data/how-to-download-high-speed-data-automatic-script.md) - [How to view High Speed Data](https://support.onegiantleap.co.nz/3.0/general/high-speed-data/how-to-view-high-speed-data.md) - [How to change the High Speed Data settings](https://support.onegiantleap.co.nz/3.0/general/high-speed-data/how-to-change-the-high-speed-data-settings.md) - [Shaft Information](https://support.onegiantleap.co.nz/3.0/general/shaft-information.md) - [Model Descriptions](https://support.onegiantleap.co.nz/3.0/general/model-descriptions.md) - [Power Meter](https://support.onegiantleap.co.nz/3.0/general/model-descriptions/power-meter.md) - [Power Meter w/ High Speed Data](https://support.onegiantleap.co.nz/3.0/general/model-descriptions/power-meter-w-high-speed-data.md) - [Firmware Changelog](https://support.onegiantleap.co.nz/3.0/general/firmware-changelog.md) - [Manufacturer's Warranty](https://support.onegiantleap.co.nz/3.0/general/manufacturers-warranty.md) ## Gen 2.1 - [Introduction](https://support.onegiantleap.co.nz/2.1/master.md) - [Getting Started](https://support.onegiantleap.co.nz/2.1/kayak/getting-started.md) - [Assemble your kayak power meter](https://support.onegiantleap.co.nz/2.1/kayak/getting-started/how-to-assemble-a-kayak-power-meter.md) - [Charge your kayak power meter](https://support.onegiantleap.co.nz/2.1/kayak/getting-started/how-to-charge-the-kayak-power-meter-batteries.md) - [Configure your kayak power meter settings](https://support.onegiantleap.co.nz/2.1/kayak/getting-started/how-to-set-the-kayak-power-meter-settings.md) - [Blade tip to hand distances](https://support.onegiantleap.co.nz/2.1/kayak/getting-started/how-to-set-the-kayak-power-meter-settings/blade-tip-to-hand-distance.md): The distance from the left blade tip to the left hand and the distance from the right blade tip to the right hand. - [Blade tip to blade tip distance](https://support.onegiantleap.co.nz/2.1/kayak/getting-started/how-to-set-the-kayak-power-meter-settings/blade-tip-to-blade-tip-distance.md): The distance between blade tip to blade tip. - [Blade twist](https://support.onegiantleap.co.nz/2.1/kayak/getting-started/how-to-set-the-kayak-power-meter-settings/blade-twist.md): The hand which grips and twists the shaft/blade and the blade twist angle. - [Blade type attached to shaft](https://support.onegiantleap.co.nz/2.1/kayak/getting-started/how-to-set-the-kayak-power-meter-settings/blade-type-attached-to-shaft.md): The make and model of the blades you have attached to the shaft e.g. Jantex Beta Large. - [Blade tip to datum distances](https://support.onegiantleap.co.nz/2.1/kayak/getting-started/how-to-set-the-kayak-power-meter-settings/blade-tip-to-datum-distances.md): The distance from the left blade tip to the left datum and the distance from the right blade tip to the right datum. - [Calibration](https://support.onegiantleap.co.nz/2.1/kayak/calibration.md) - [Zero Offset](https://support.onegiantleap.co.nz/2.1/kayak/calibration/zero-offset.md) - [Zero Offset calibration](https://support.onegiantleap.co.nz/2.1/kayak/calibration/zero-offset/how-to-perform-a-zero-offset-calibration.md) - [Scale Factor](https://support.onegiantleap.co.nz/2.1/kayak/calibration/scale-factor.md) - [Blades-on Scale Factor Calibration](https://support.onegiantleap.co.nz/2.1/kayak/calibration/scale-factor/dev-scale-factor-calibration.md) - [Scale Factor calibration](https://support.onegiantleap.co.nz/2.1/kayak/calibration/scale-factor/how-to-perform-a-scale-factor-calibration.md) - [Advanced](https://support.onegiantleap.co.nz/2.1/kayak/advanced.md) - [Adjust your clamp](https://support.onegiantleap.co.nz/2.1/kayak/advanced/how-to-adjust-a-kayak-power-meter-clamp.md) - [Remove and attach your sleeve](https://support.onegiantleap.co.nz/2.1/kayak/advanced/how-to-remove-and-install-the-clamp-sleeve.md) - [Assemble, Charge and Configure](https://support.onegiantleap.co.nz/2.1/dragon-boat/getting-started.md): Let's get that power meter sussed! - [Assemble](https://support.onegiantleap.co.nz/2.1/dragon-boat/getting-started/assemble.md): Putting it all together - [Charge](https://support.onegiantleap.co.nz/2.1/dragon-boat/getting-started/charge.md): Power up - [Configure](https://support.onegiantleap.co.nz/2.1/dragon-boat/getting-started/configure.md): A few steps away from being done - [Sleep](https://support.onegiantleap.co.nz/2.1/dragon-boat/getting-started/sleep.md): Let your meter get some rest before your next go - [Getting Started](https://support.onegiantleap.co.nz/2.1/high-kneel-canoe/getting-started.md) - [How to assemble a high-kneel canoe power meter](https://support.onegiantleap.co.nz/2.1/high-kneel-canoe/getting-started/how-to-assemble-a-high-kneel-canoe-power-meter.md) - [Getting Started](https://support.onegiantleap.co.nz/2.1/outrigger-canoe/getting-started.md) - [How to assemble an outrigger canoe power meter](https://support.onegiantleap.co.nz/2.1/outrigger-canoe/getting-started/how-to-assemble-an-outrigger-canoe-power-meter.md) - [How to set the outrigger canoe power meter settings](https://support.onegiantleap.co.nz/2.1/outrigger-canoe/getting-started/how-to-set-the-outrigger-canoe-power-meter-settings.md) - [Blade tip to handle distance](https://support.onegiantleap.co.nz/2.1/outrigger-canoe/getting-started/how-to-set-the-outrigger-canoe-power-meter-settings/blade-tip-to-handle-distance.md) - [Blade tip to bottom hand distance](https://support.onegiantleap.co.nz/2.1/outrigger-canoe/getting-started/how-to-set-the-outrigger-canoe-power-meter-settings/blade-tip-to-bottom-hand-distance.md) - [Blade kickback angle](https://support.onegiantleap.co.nz/2.1/outrigger-canoe/getting-started/how-to-set-the-outrigger-canoe-power-meter-settings/blade-kickback-angle.md) - [Getting Started](https://support.onegiantleap.co.nz/2.1/sup/getting-started.md) - [How to assemble a SUP power meter](https://support.onegiantleap.co.nz/2.1/sup/getting-started/how-to-assemble-a-sup-power-meter.md) - [How to set the SUP power meter settings](https://support.onegiantleap.co.nz/2.1/sup/getting-started/how-to-set-the-sup-power-meter-settings.md) - [Blade tip to handle distance](https://support.onegiantleap.co.nz/2.1/sup/getting-started/how-to-set-the-sup-power-meter-settings/blade-tip-to-handle-distance.md) - [Blade kickback angle](https://support.onegiantleap.co.nz/2.1/sup/getting-started/how-to-set-the-sup-power-meter-settings/blade-kickback-angle.md) - [Web Bluetooth App](https://support.onegiantleap.co.nz/2.1/general/web-bluetooth-app.md) - [How to place the power meter in deep sleep](https://support.onegiantleap.co.nz/2.1/general/web-bluetooth-app/how-to-place-the-power-meter-in-deep-sleep.md) - [Updating Firmware](https://support.onegiantleap.co.nz/2.1/general/updating-firmware.md) - [How to update the power meter firmware using the Web Browser](https://support.onegiantleap.co.nz/2.1/general/updating-firmware/how-to-update-the-power-meter-firmware-using-the-web-browser.md) - [How to update the power meter firmware using nRF Connect](https://support.onegiantleap.co.nz/2.1/general/updating-firmware/how-to-update-the-power-meter-firmware-using-nrf-connect.md) - [Real-time Data](https://support.onegiantleap.co.nz/2.1/general/real-time-data.md) - [How to pair a Garmin Forerunner 910XT with a power meter](https://support.onegiantleap.co.nz/2.1/general/real-time-data/how-to-pair-a-garmin-forerunner-910xt-with-a-power-meter.md) - [How to pair a Garmin Edge 1030 with a power meter](https://support.onegiantleap.co.nz/2.1/general/real-time-data/how-to-pair-a-garmin-edge-1030-with-a-power-meter.md) - [High Speed Data](https://support.onegiantleap.co.nz/2.1/general/high-speed-data.md) - [How to start/stop recording High Speed Data](https://support.onegiantleap.co.nz/2.1/general/high-speed-data/how-to-start-stop-recording-high-speed-data.md) - [How to download High Speed Data (ANT)](https://support.onegiantleap.co.nz/2.1/general/high-speed-data/how-to-download-high-speed-data.md) - [How to view High Speed Data](https://support.onegiantleap.co.nz/2.1/general/high-speed-data/how-to-view-high-speed-data.md) - [How to change the High Speed Data settings](https://support.onegiantleap.co.nz/2.1/general/high-speed-data/how-to-change-the-high-speed-data-settings.md) - [Shaft Information](https://support.onegiantleap.co.nz/2.1/general/shaft-information.md) - [Model Descriptions](https://support.onegiantleap.co.nz/2.1/general/model-descriptions.md) - [Power Meter](https://support.onegiantleap.co.nz/2.1/general/model-descriptions/power-meter.md) - [Power Meter w/ High Speed Data](https://support.onegiantleap.co.nz/2.1/general/model-descriptions/power-meter-w-high-speed-data.md) - [Firmware Changelog](https://support.onegiantleap.co.nz/2.1/general/firmware-changelog.md) - [Manufacturer's Warranty](https://support.onegiantleap.co.nz/2.1/general/manufacturers-warranty.md) ## Gen 3.1 & 3.2 - [Introduction](https://support.onegiantleap.co.nz/master.md) - [Assemble your power meter](https://support.onegiantleap.co.nz/kayak/assemble.md) - [Configure your power meter](https://support.onegiantleap.co.nz/kayak/configure-your-power-meter.md) - [Blade tip to hand distances](https://support.onegiantleap.co.nz/kayak/configure-your-power-meter/blade-tip-to-hand-distance.md): The distance from the left blade tip to the left hand and the distance from the right blade tip to the right hand - [Blade tip to blade tip distance](https://support.onegiantleap.co.nz/kayak/configure-your-power-meter/blade-tip-to-blade-tip-distance.md): The distance between blade tip to blade tip - [Blade twist](https://support.onegiantleap.co.nz/kayak/configure-your-power-meter/blade-twist.md): The hand which grips and twists the shaft/blade and the blade twist angle - [Blade type attached to shaft](https://support.onegiantleap.co.nz/kayak/configure-your-power-meter/blade-type-attached-to-shaft.md): The make and model of the blades you have attached to the shaft e.g. Jantex Beta Large - [Left blade tip to LED distance](https://support.onegiantleap.co.nz/kayak/configure-your-power-meter/blade-tip-to-datum-distances.md): The distance from the left blade tip to the center of the LED - [Assemble your power meter (Gen 3.1)](https://support.onegiantleap.co.nz/canoe/assemble.md): Canoe / Dragon Boat / SUP - [Assemble your power meter (Gen 3.2)](https://support.onegiantleap.co.nz/canoe/assemble-1.md): Canoe / Dragon Boat / SUP - [Configure your power meter](https://support.onegiantleap.co.nz/canoe/configure-your-power-meter.md) - [Blade tip to hand distances](https://support.onegiantleap.co.nz/canoe/configure-your-power-meter/blade-tip-to-hand-distances.md) - [Blade type attached to shaft](https://support.onegiantleap.co.nz/canoe/configure-your-power-meter/blade-type-attached-to-shaft.md): The make and model of the blades you have attached to the shaft e.g. Tai - Waka Ama Carbon Broadbill - [Blade tip to LED distance](https://support.onegiantleap.co.nz/canoe/configure-your-power-meter/blade-tip-to-led-distance.md): The distance from the blade tip to the center of the LED - [Shaft to handle offset distance](https://support.onegiantleap.co.nz/canoe/configure-your-power-meter/shaft-to-handle-offset-distance.md): The distance that the handle is offset from the shaft axis - [Battery Charging](https://support.onegiantleap.co.nz/general/battery.md) - [Clamp Adjustment](https://support.onegiantleap.co.nz/general/clamp.md) - [Web Bluetooth App](https://support.onegiantleap.co.nz/general/web-bluetooth-app.md) - [Zero Offset Calibration](https://support.onegiantleap.co.nz/general/zero-offset.md) - [How to perform a Zero Offset calibration](https://support.onegiantleap.co.nz/general/zero-offset/how-to-perform-a-zero-offset-calibration.md) - [Scale Factor Calibration](https://support.onegiantleap.co.nz/general/scale-factor.md) - [N channel Scale Factor calibration](https://support.onegiantleap.co.nz/general/scale-factor/how-to-perform-a-scale-factor-calibration.md) - [O channel Scale Factor calibration](https://support.onegiantleap.co.nz/general/scale-factor/how-to-perform-a-scale-factor-calibration-1.md) - [Updating Firmware](https://support.onegiantleap.co.nz/general/updating-firmware.md) - [How to update the power meter firmware using the Web Browser](https://support.onegiantleap.co.nz/general/updating-firmware/how-to-update-the-power-meter-firmware-using-the-web-browser.md) - [Latest firmware version](https://support.onegiantleap.co.nz/general/updating-firmware/latest-firmware-version.md) - [Real-time Data](https://support.onegiantleap.co.nz/general/real-time-data.md): View your power, power balance and cadence data as you paddle - [How to pair with your device](https://support.onegiantleap.co.nz/general/real-time-data/how-to-pair-with-your-device.md) - [Deep Sleep](https://support.onegiantleap.co.nz/general/deep-sleep.md) - [Metrics](https://support.onegiantleap.co.nz/general/metrics.md) - [Power](https://support.onegiantleap.co.nz/general/metrics/power.md) - [Force](https://support.onegiantleap.co.nz/general/metrics/force.md) - [Manufacturer's Warranty](https://support.onegiantleap.co.nz/general/manufacturers-warranty.md) - [Shaft & Blade Sizing](https://support.onegiantleap.co.nz/general/shaft-and-blade-sizing.md) - [Connections using hot melt glue](https://support.onegiantleap.co.nz/general/connections-using-hot-melt-glue.md) - [High Speed Data](https://support.onegiantleap.co.nz/legacy-features/high-speed-data.md) - [How to start/stop recording High Speed Data](https://support.onegiantleap.co.nz/legacy-features/high-speed-data/how-to-start-stop-recording-high-speed-data.md) - [How to download High Speed Data (ANT)](https://support.onegiantleap.co.nz/legacy-features/high-speed-data/how-to-download-high-speed-data.md) - [How to view High Speed Data](https://support.onegiantleap.co.nz/legacy-features/high-speed-data/how-to-view-high-speed-data.md) - [How to resolve the High Speed Data recording fault](https://support.onegiantleap.co.nz/legacy-features/high-speed-data/how-to-resolve-the-high-speed-data-recording-fault.md): This fault is only relevant to Gen. 3.1 - [GPS Sync Box](https://support.onegiantleap.co.nz/legacy-features/gps-sync-box.md) - [Functional Threshold Power](https://support.onegiantleap.co.nz/training-guide/functional-threshold-power.md) - [Power Zones](https://support.onegiantleap.co.nz/training-guide/power-zones.md) - [Fitness Tracking](https://support.onegiantleap.co.nz/training-guide/fitness-tracking.md) - [Optimum Cadence](https://support.onegiantleap.co.nz/training-guide/optimum-cadence.md) - [Technique Efficiency](https://support.onegiantleap.co.nz/training-guide/technique-efficiency.md) - [Training to improve 30 second or 1 minute Power](https://support.onegiantleap.co.nz/training-guide/training-to-improve-30-second-or-1-minute-power.md) - [Training to improve 4 minute Power](https://support.onegiantleap.co.nz/training-guide/training-to-improve-4-minute-power.md) - [Training to improve Functional Threshold Power](https://support.onegiantleap.co.nz/training-guide/training-to-improve-functional-threshold-power.md) - [Training to improve Endurance](https://support.onegiantleap.co.nz/training-guide/training-to-improve-endurance.md)