LogoLogo
Gen 3.0
Gen 3.0
  • Introduction
  • Kayak
    • Getting Started
      • Assemble your power meter
      • Charge your power meter
      • Configure your power meter settings
        • Blade tip to hand distances
        • Blade tip to blade tip distance
        • Blade twist
        • Blade type attached to shaft
        • Left blade tip to LED distance
    • Calibration
      • Zero Offset
        • Zero Offset calibration
      • Scale Factor
        • N channel Scale Factor calibration
        • O channel Scale Factor calibration
    • Advanced
      • Deep sleep
      • Adjust your clamp
      • Remove and attach your sleeve
  • Canoe/sup/dragon boat
    • Getting Started
      • Assemble
      • Charge
      • Configure
    • Calibration
      • Zero Offset
        • Perform a ZO calibration
      • Scale Factor
        • A channel Scale Factor calibration
    • Advanced
      • Deep sleep
      • Adjust your clamp
      • Remove and attach your sleeve
  • General
    • Web Bluetooth App
      • How to place the power meter in deep sleep
    • Updating Firmware
      • How to update the power meter firmware using the Web Browser
      • How to update the power meter firmware using nRF Connect
    • Real-time Data
      • How to pair a Garmin Forerunner 910XT with a power meter
      • How to pair a Garmin Edge 1030 with a power meter
    • High Speed Data
      • How to start/stop recording High Speed Data
      • How to download High Speed Data (ANT)
      • How to download High Speed Data (Automatic Script)
      • How to view High Speed Data
      • How to change the High Speed Data settings
    • Shaft Information
    • Model Descriptions
      • Power Meter
      • Power Meter w/ High Speed Data
    • Firmware Changelog
    • Manufacturer's Warranty
Powered by GitBook
On this page
  • 1. Navigate to the Update webpage
  • 2. Select Device (Power Meter Name)
  • 3. Power Meter is now in bootloader mode
  • 4. Select Device (DFU Target)
  • 5. Firmware update in progress
  • 6. Firmware complete
  1. General
  2. Updating Firmware

How to update the power meter firmware using the Web Browser

PreviousUpdating FirmwareNextHow to update the power meter firmware using nRF Connect

Last updated 2 years ago

1. Navigate to the Update webpage

  • Head to:

  • Choose a firmware package that you've previously downloaded.

  • Click 'Select Device' button.

2. Select Device (Power Meter Name)

  • A dialog box should pop up as shown below.

  • Select the appropriate device ('PwrMeter').

  • Once selected, click the 'Pair' button.

3. Power Meter is now in bootloader mode

  • Click 'Select Device' button once more.

4. Select Device (DFU Target)

  • A dialog box should pop up as shown below.

  • Select the device labelled 'DFU Target'.

  • Once selected, click the 'Pair' button.

5. Firmware update in progress

6. Firmware complete

https://thegecko.github.io/web-bluetooth-dfu/examples/web.html