LogoLogo
Gen 3.1 & 3.2
Gen 3.1 & 3.2
  • Introduction
  • Kayak
    • Assemble your power meter
    • Configure your power meter
      • Blade tip to hand distances
      • Blade tip to blade tip distance
      • Blade twist
      • Blade type attached to shaft
      • Left blade tip to LED distance
  • Canoe/Dragon Boat/SUP
    • Assemble your power meter (Gen 3.1)
    • Assemble your power meter (Gen 3.2)
    • Configure your power meter
      • Blade tip to hand distances
      • Blade type attached to shaft
      • Blade tip to LED distance
      • Shaft to handle offset distance
  • General
    • Battery Charging
    • Clamp Adjustment
    • Web Bluetooth App
    • Zero Offset Calibration
      • How to perform a Zero Offset calibration
    • Scale Factor Calibration
      • N channel Scale Factor calibration
      • O channel Scale Factor calibration
    • Updating Firmware
      • How to update the power meter firmware using the Web Browser
      • Latest firmware version
    • Real-time Data
      • How to pair with your device
    • High Speed Data
      • How to start/stop recording High Speed Data
      • How to download High Speed Data (ANT)
      • How to download High Speed Data (Automatic Script) - Experimental
      • How to view High Speed Data
    • Deep Sleep
    • GPS Sync Box
    • Metrics
      • Power
      • Force
    • Upgrade Description
    • Manufacturer's Warranty
    • Troubleshooting
      • High Speed Data Recording Fault
    • Shaft & Blade Sizing
    • Connections using hot melt glue
  • Training Guide
    • Functional Threshold Power
    • Power Zones
    • Fitness Tracking
    • Optimum Cadence
    • Technique Efficiency
    • Training to improve 30 second or 1 minute Power
    • Training to improve 4 minute Power
    • Training to improve Functional Threshold Power
    • Training to improve Endurance
Powered by GitBook
On this page
  1. Canoe/Dragon Boat/SUP

Configure your power meter

PreviousAssemble your power meter (Gen 3.2)NextBlade tip to hand distances

Last updated 8 months ago

All of the settings need to be set before using your power meter for the first time. Additionally, one or more of the settings may require updating whenever you:

  • change the location of your hands along the shaft

  • change your overall paddle length

  • attach a different blade type

The settings can be set using the , specifically the page.

Web Bluetooth App
https://app.onegiantleap.co.nz/configuration
Example of the Web Bluetooh app configuration settins