LogoLogo
Gen 3.1 & 3.2
Gen 3.1 & 3.2
  • Introduction
  • Kayak
    • Assemble your power meter
    • Configure your power meter
      • Blade tip to hand distances
      • Blade tip to blade tip distance
      • Blade twist
      • Blade type attached to shaft
      • Left blade tip to LED distance
  • Canoe/Dragon Boat/SUP
    • Assemble your power meter (Gen 3.1)
    • Assemble your power meter (Gen 3.2)
    • Configure your power meter
      • Blade tip to hand distances
      • Blade type attached to shaft
      • Blade tip to LED distance
      • Shaft to handle offset distance
  • General
    • Battery Charging
    • Clamp Adjustment
    • Web Bluetooth App
    • Zero Offset Calibration
      • How to perform a Zero Offset calibration
    • Scale Factor Calibration
      • N channel Scale Factor calibration
      • O channel Scale Factor calibration
    • Updating Firmware
      • How to update the power meter firmware using the Web Browser
      • Latest firmware version
    • Real-time Data
      • How to pair with your device
    • High Speed Data
      • How to start/stop recording High Speed Data
      • How to download High Speed Data (ANT)
      • How to download High Speed Data (Automatic Script) - Experimental
      • How to view High Speed Data
    • Deep Sleep
    • GPS Sync Box
    • Metrics
      • Power
      • Force
    • Upgrade Description
    • Manufacturer's Warranty
    • Troubleshooting
      • High Speed Data Recording Fault
    • Shaft & Blade Sizing
    • Connections using hot melt glue
  • Training Guide
    • Functional Threshold Power
    • Power Zones
    • Fitness Tracking
    • Optimum Cadence
    • Technique Efficiency
    • Training to improve 30 second or 1 minute Power
    • Training to improve 4 minute Power
    • Training to improve Functional Threshold Power
    • Training to improve Endurance
Powered by GitBook
On this page
  • Step 1. Navigate to the High Speed Data page of the Web Bluetooth app and connect to the power meter
  • Step 2. (Optional) Click on the 'Data' setting to select the variables you want to record
  • Step 3. (Optional) Click on the 'Recording Limit' setting to select the duration of the recording
  • Step 4. Click the 'START' button in the bottom-right corner of the screen to start the recording
  • Step 5. (Optional) Click the 'STOP' button in the bottom-right corner of the screen to stop the recording
  1. General
  2. High Speed Data

How to start/stop recording High Speed Data

PreviousHigh Speed DataNextHow to download High Speed Data (ANT)

Last updated 1 year ago

Step 1. Navigate to the page of the Web Bluetooth app and connect to the power meter

Step 2. (Optional) Click on the 'Data' setting to select the variables you want to record

Note: Keep the number of data messages to a minimum. Downloading excessively large files can take a long time.

Step 3. (Optional) Click on the 'Recording Limit' setting to select the duration of the recording

Note: Keep the recording duration as short as necessary. Downloading excessively large files can take a long time.

Step 4. Click the 'START' button in the bottom-right corner of the screen to start the recording

Step 5. (Optional) Click the 'STOP' button in the bottom-right corner of the screen to stop the recording

High Speed Data