LogoLogo
Gen 3.1 & 3.2
Gen 3.1 & 3.2
  • Introduction
  • Kayak
    • Assemble your power meter
    • Configure your power meter
      • Blade tip to hand distances
      • Blade tip to blade tip distance
      • Blade twist
      • Blade type attached to shaft
      • Left blade tip to LED distance
  • Canoe/Dragon Boat/SUP
    • Assemble your power meter (Gen 3.1)
    • Assemble your power meter (Gen 3.2)
    • Configure your power meter
      • Blade tip to hand distances
      • Blade type attached to shaft
      • Blade tip to LED distance
      • Shaft to handle offset distance
  • General
    • Battery Charging
    • Clamp Adjustment
    • Web Bluetooth App
    • Zero Offset Calibration
      • How to perform a Zero Offset calibration
    • Scale Factor Calibration
      • N channel Scale Factor calibration
      • O channel Scale Factor calibration
    • Updating Firmware
      • How to update the power meter firmware using the Web Browser
      • Latest firmware version
    • Real-time Data
      • How to pair with your device
    • High Speed Data
      • How to start/stop recording High Speed Data
      • How to download High Speed Data (ANT)
      • How to download High Speed Data (Automatic Script) - Experimental
      • How to view High Speed Data
    • Deep Sleep
    • GPS Sync Box
    • Metrics
      • Power
      • Force
    • Upgrade Description
    • Manufacturer's Warranty
    • Troubleshooting
      • High Speed Data Recording Fault
    • Shaft & Blade Sizing
    • Connections using hot melt glue
  • Training Guide
    • Functional Threshold Power
    • Power Zones
    • Fitness Tracking
    • Optimum Cadence
    • Technique Efficiency
    • Training to improve 30 second or 1 minute Power
    • Training to improve 4 minute Power
    • Training to improve Functional Threshold Power
    • Training to improve Endurance
Powered by GitBook
On this page
  • Step 1. Attach the end of the measuring tape to the left blade tip
  • Step 2. Measure the distance from the left blade tip to the left hand
  • Step 3. Attach the end of the measuring tape to the right blade tip
  • Step 4. Measure the distance from the right blade tip to the right hand
  • Step 5. Enter the distances into the 'Blade tip to hand distances' setting
  1. Kayak
  2. Configure your power meter

Blade tip to hand distances

The distance from the left blade tip to the left hand and the distance from the right blade tip to the right hand

PreviousConfigure your power meterNextBlade tip to blade tip distance

Last updated 9 months ago

Step 1. Attach the end of the measuring tape to the left blade tip

Step 2. Measure the distance from the left blade tip to the left hand

  • Measure from the left blade tip to the knuckle of the middle finger of the left hand (the hand closest to the left blade).

  • The left blade tip to left hand distance is 610mm in the example image below.

Step 3. Attach the end of the measuring tape to the right blade tip

Step 4. Measure the distance from the right blade tip to the right hand

  • Measure from the right blade tip to the knuckle of the middle finger of the right hand (the hand closest to the right blade).

Step 5. Enter the distances into the 'Blade tip to hand distances' setting

the distance here is 610 mm