> For the complete documentation index, see [llms.txt](https://support.onegiantleap.co.nz/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://support.onegiantleap.co.nz/kayak/configure-your-power-meter/blade-type-attached-to-shaft.md).

# Blade type attached to shaft

The make and model of the blades you have attached to the shaft e.g. Jantex Beta Large

## Step 1. Determine the blade type

* Determine the make, model and size of the blades attached to the shaft.

## Step 2. Select the blade type

* Click on 'Blade type' and select from the drop-down list the blade type identified in the previous step.

<figure><img src="https://2027676102-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F6BJWlEY36X5PnXFgzbFP%2Fuploads%2FQrbhnTE5K7qSUNkoqxce%2Fimage.png?alt=media&amp;token=2e2472c9-17cb-48ae-9664-f8b28c24e8c8" alt=""><figcaption></figcaption></figure>